Exciting tips on how to choose your own DIY home wind turbine

Tags: , , ,

DIY wind turbine

Introduction:

Living off the grid is a term that suggests not being linked up to typical electricity suppliers like application companies or government entities. It is feasible to save electricity and to eliminate your electricity bill by creating your own home power system viz. DIY wind turbine. Isn’t it annoying to be continuously held hostage by greedy companies who reputedly raise your bill anytime they feel they have to make more cash? On top of that the bigger the use rates the poorer the service seems to get.

Also, living off the grid will not only lower your household bills, it also saves power. So, it helps to make a contribution to saving the environment for your kids. When you know how to live off-grid, you reduce your dependability on non-renewable resources. Who would like to depend on public utilities all the time? Making your own home power system helps you are dependent only on your resources and not the ones supplied by executives or firms. How often have you cursed when faced with a power blackout in the middle of some significant work or a party?

Wouldn’t you like to take charge of such factors affecting your life? With alternate power solutions, you can. Freedom to use naturally available resources like sun and wind to drive your lights and appliances. How would you feel when you do not have to fret about how much power you are using? You can make use of the abounding power available in nature to light up your home and make your food. Homemade wind and solar power are the solutions to how to save electricity.

The average American household consumes about 10,656kWh of electricity to keep numerous home appliances running each year. With electricity costs heading north, many householders are forced to consider better solutions to save on their electrical bills. The most discussed device to date – DIY wind turbines.

Wind turbines have been around for ages, providing free power from the wind converted into electricity. Though there are a considerable number of giant firms producing wind turbines of various sizes and capacity, up until latterly, wind turbines are beyond the reach of the standard family.

The littlest scale wind turbine costs at least $3000 to install. But such little scale turbines can only produce awfully nominal electricity to bolster your current grid supply. It will take years before you can realize the wind turbine repaying your initial investment, via energy savings. In recent times, DIY wind turbines are getting more popular amongst young homeowners who are keen to cut down their monthly electrical budget. It’s also a more practical idea rather than spending thousands of bucks on a device that you are doubtful would benefit your household extensively.

Around the globe, folks are making their own wind generators from their garage and installing them in their back garden. It helps that building these wind turbines don’t cost much, so the chance of having negative returns in investment is virtually nothing.

Making wind turbines isn’t really a tricky job to do. With a proper set of the instruction manual and knowing some wind turbine facts you can obtain from the internet, it takes just a couple of hours to properly construct and put together the parts, and another hour or so to erect it in your yard.

So if you are stressed with high electricity bills each month, why not build up your very own DIY wind turbine? It takes only 1 small investment to build one for your home, but you reap the benefits month after month. Get your wind turbine kit today and be number one in your neighbourhood to provide electricity for free!

How to choose the place of installation of small wind turbines?

Locations for small wind turbines installed generating capacity and safe operation is very important, the following description for reference.

A good site should have installed two basic requirements: high average wind speeds and less turbulence.

(1) The higher the average wind speed, the smaller the wind generator output power and power generation capacity will be. Wind energy is proportional to the cube of wind speed.

(2) If air is unstable with severe turbulence, the destructive power of small wind turbine generators is not conducive to the safety of small wind turbines for many years to run, but will also significantly reduce turbulence generating capacity. Fans of the tower as high as possible, because the higher the ground, the more smoothly the airflow of wind speed.

In flat areas, a small power generator machine recommended a mounting height of not less than 8m. Trees and all kinds of buildings will form a barrier to airflow. The air in front and the back of these disorders form a stagnant and turbulent region. You should avoid this type of fan installed in the area.

How to DIY your own Wind Turbine Generator?

You have managed to gather all the parts to utilize for your wind turbine. You can always combine output from the solar panel and wind turbine to avoid dependency on the grid power source. I believe you have also estimated your wind turbine expenditure and you are now fully determined to construct your own windmill. How do you assemble all the items you have gathered?

Here’s how you do it in 9 easy steps:

Step 1: Procure or buy all the components on either Alibaba or from a hardware shop in your area at affordable rates. You’ll need a DC power motor, metallic sheets, PVC pipe, hub, tower, deep-cycle battery, charge controlling device, dump load, AC inverter and sufficient nuts as well as bolts to connect the three blades to the tower.

Step 2: To start with, cut the PVC pipe into a 3 ft long piece, and then cut the pipe into four pieces. 3 will be used for blades, and one shall be a spare. You will have to shape each blade so that one side tapers into 2 points. The blades should of approximately 6 ft long. They could be smaller, but surely not smaller than 4 ft in which case they may not spin easily.

Step 3: Now, make holes on the narrow end of your blades so that their positions align with the holes in your hub.

Step 4: You may then weld or bolt a coupling in the middle of your hub, and then join the 3 blades to the hub and then attach the hub to the motor shaft. Small steel bars measuring 12 by 2 should be fine in most cases.

Step 5: Align the blades and the hub by marking each blade with a number and making sure that the same blade does not land at the bottom every time. If so, then you may have to scrap some metal off your connected metal bars.

Step 6: Take the DC motor shaft and slide it into the hole in the middle of your hub, also making sure that the hub itself is securely fastened.

Step 7: Now, look at your tail shaft to figure out the height and make a hole through the top part of the tower, above where the tail shaft’s upper end will go.

Step 8: Then, chop the actual tail shaft from your metal which should be approximately 3-4 ft long and attach it to the tower with a flat bracket.

Step 9: Now, make sure that your hub and the blades are joined to your tower and then wire the remaining components together. Remember to connect the DC motor to the charge controller and then connect that to the battery, and the battery to the AC inverter, which in turn goes into your utility box. The thickness of cable you will require would depend on the materials you used. If you need a professional opinion, call an electrician.

Like I mentioned above, this is just a tip of the iceberg regarding DIY wind turbines – just enough so that you may understand how to build a simple turbine yourself.The wind turbine described above should generate 300-500 watts of power, assuming that your mean wind velocity is a minimum of 10-20 mph.

How to choose DIY wind turbine

If you are thinking about generating electricity you need using natural winds to meet your domestic electricity needs. It is essential to learn how to choose a domestic wind turbine for your particular situation. Although you do not have to become an expert in the field of alternative energy generation, there are some important things that you should know before purchasing your DIY home wind turbine.

1.Research thoroughly

Research can be one of the most important steps a home buyer should make before making a major purchase such as a home windmill. While producer literature can be a great source of information, I usually look for several independent reviews that I can find.

One of the best sources of independent reviews may be domestic wind energy or Internet forums on a similar topic. Spend a few hours that have gone to others before your experience. Positives, negatives and everything in between can give you invaluable insight into your DIY home turbine project. Watch out for those who are not selling – pay special attention to those who have completed a successful installation. Do not be afraid to ask yourself questions.

2. Analyze your weather conditions

Remember, a windmill will only produce electricity when there is wind. I was recently on a trip through the Midwestern United States, and when I saw a lot of windmills on the side of highways, but they were completely on quiet days. Quiet days do not mean power generation.

Another step in your research should be to determine the air quality of your geographical area. What is the average wind speed, how many days does it fly at a certain velocity, there are some important questions that you need to answer. Windmills always require a certain velocity to make electricity. If your conditions are such that it is difficult to find the minimum wind velocity, then you may not be able to work the turbine for you. Do this research

3. Determine how much electricity you need to generate

There is a huge variety of windmills in the market today – every shape and size for all applications. To make a good decision for you, one of which will be best for you, you need to determine how much electricity you want to generate.

First of all, you have to read your current electricity bill and find out how much electricity you buy every month. The slim figure will give you a basis for being able to choose the size and output of your windmill. You can try to generate 100% of your power needs this way – this will require a large and expensive setup, which includes large power inverters and battery storage capacity. Or, you can decide to meet your peak power needs. At least you will be able to make an informed decision, and know in advance how your turbine will perform for you.

4. DIY project or hire a contractor

This is a major decision. If you are an easygoing person who likes major home projects, then a DIY wind turbine may be right for you. On the other hand, there are many good alternative energy contractors who specialize in domestic wind turbines that can help make your project a success – and get it done. Specific knowledge is certainly required, although it is not necessary for it to come.

Cost is also a factor here – labor to install, either on the ground or on the roof, can easily make up to 60% of the total project cost. Again, hiring a contractor can help you avoid costly losses, possibly saving money in the long run.

Don’t forget about the federal tax credit for setting up a home windmill. This tax credit can be up to $ 4,000 of your total project cost.

5. Buy quality

Whatever direction you decide to take – small system or large, DIY or contractor installed – do not make minimum cost your main objective. Although a high-quality system may cost slightly more initially, the long-term payback can be very large. Minimum maintenance on a wind turbine 30 feet off the ground can be a real plus over the life of the system. Proper electrical components from previous years instead of months will save thousands, and make your domestic wind turbine safer for your home.

6. Domestic wind turbine only a partial solution

Just because you have installed a quality windmill, which is the right size for your application, do not expect that wind energy can now provide the energy you need, 100% of the time. In fact, wind power is a partial solution to your home’s energy needs, and should be used in addition to electricity from your current utility company.

For a truly complete alternative energy system, solar power should really be part of the plan.

If you have done your research, purchased a system of the appropriate size for your needs, and have realistic expectations for alternative energy options in your home, then a home wind turbine can greatly suit you and your family.

Claim your $ 4000 tax credit for building your own windmill!

Leave a Reply

Your email address will not be published. Required fields are marked *